100mm Standard Through-Hole Incremental Encoders

Home " Products " Incremental Encoders " Incremental Encoder 100mm Standard Through-Hole Diameter Type

External dimensions 100mm through-hole type, hole diameter up to 45mm
Precise photoelectric or magnetic induction technology, good electromagnetic compatibility
Up to 10,000 P/R pulses per revolution
Over-voltage, over-current, surge protection
Operating temperatures are selectable from -40°C...+110°C.
Rugged metal housing, double bearing design, protection class up to IP65
Reverse short-circuit and short-circuit protection to minimize the impact of installation errors on the encoder.

100mm Standard Through-Hole Incremental Encoders - Civiti

Product Specifications (SAH100 Incremental Pulse Series)

Parameter Name	SAH100A / SAH100B (Through-Hole Type)
Flange Characteristics	Through-hole type
Spindle Dimensions	Through-hole Ø 25, 30, 35, 38, 42, 45mm
Housing Material	Aluminum alloy (optional stainless steel housing)
Principle of Induction	Optics
Power supply voltage	5V ± 5% 10~30VDC 5~30VDC
Output Method/Signal	HTL/Push-Pull, TTL/RS422; Signal A B Z + A/ B/ Z/
Response frequency	300 kHz max
Physical Protection	Reverse polarity protection: Yes Short-circuit protection: Yes
Performance	Maximum speed: 6000 rpm; Spindle load: Radial 150 N, Axial 80 N
Environmental Protection	Protection Rating: IP65; Operating Temperature: -40°C to +85°C (Optional: -40°C to +110°C)
Starting Torque	< 0.01 N·m (IP65)
Resistance Index	Impact resistance: 50g, 11ms; Vibration resistance: 10g, 10...2000Hz
Pulse count per revolution	Common pulse counts: 1...10,000; supports customization for any specification within 10,000 pulses.

Electrical Connections (Wiring Definitions)

Signal	0V	UB	NC	NC	A	A-	B	B-	0	0-	Block
M23 connector, 12-pin	10	12	11	2	5	6	8	1	3	4	10
M12 connector, 8-pin	1	2	-	-	3	4	5	6	7	8	1
MIL Connector (MS Standard), 10-pin	F	D	E	A	G	B	H	C	I	J	F
Wire color	白	棕	-	-	绿	黄	灰	粉	蓝	黑	Block