50mm Solid Shaft Blind Hole Type Incremental Encoders

Home " Products " Incremental Encoders " Incremental encoder with 50mm solid shaft blind hole type

Precise photoelectric sensing >>
Overall dimensions are compatible with 50mm and 58mm solid shafts, through-hole type.
Up to 16384 P/R pulses per revolution
Rugged metal housing, double bearing design, protection class up to IP67
Reverse short-circuit and short-circuit protection to minimize the impact of installation errors on the encoder.

50mm Solid Shaft Blind Hole Type Incremental Encoders - Civiti

Product Specifications (SAH50 Incremental Pulse Series)

Parameter Name	SAH50A (Solid Shaft Clamping, Synchronization, and Square Flange)	SAH50W (Through-Hole Type)
Functional Features	Ø 50mm solid shaft	Ø 50mm through-hole type
Spindle Dimensions	Ø 6, 8, 10, 12 mm	Ø 6, 8, 10, 12, 14, 15 mm
Housing Material	Aluminum (optional stainless steel housing)
Principle of Induction	Optics
Power supply voltage	5V ± 5% 10~30VDC 5~30VDC
Output Method/Signal	HTL/Push-Pull, TTL/RS422; Signal A B Z + A/ B/ Z/
Response frequency	300 kHz max
Physical Protection	Reverse polarity protection: Yes Short-circuit protection: Yes
Performance	Maximum speed: 12,000 rpm; Spindle load: Radial 80 N, Axial 40 N
Environmental Protection	Protection Rating: IP65, IP67 (optional); Operating Temperature: -40°C to +85°C
Starting Torque	< 0.01 Nm (IP65), < 0.05 Nm (IP67)
Resistance Index	Impact resistance: 2500 m/s², 6 ms; Vibration resistance: 100 m/s², 10...2000 Hz
Pulse count per revolution	1...10240 Common specifications available (any specification within 16384 pulses can be customized)

Electrical Connections (Wiring Definitions)

Signal	0V	UB	NC	NC	A	A-	B	B-	0	0-	Block
M23 connector, 12-pin	10	12	11	2	5	6	8	1	3	4	10
M12 connector, 8-pin	1	2	-	-	3	4	5	6	7	8	1
MIL Connector (MS Standard), 10-pin	F	D	E	A	G	B	H	C	I	J	F
Wire color	白	棕	-	-	绿	黄	灰	粉	蓝	黑	Block