Threaded rod torque arm for easier installation
Up to 10,000 P/R pulses per revolution
Highly resistant to interference from motors and brakes, protected against lightning, overvoltage, overcurrent, and surge impacts
Optional isolated redundant dual outputs, optional explosion proof cable glands 3/4 NPT
Available with dual output module, redundant scanning sensors and two independent and electrically isolated electronic circuits
The housing is protected against dust and liquid contamination by a rugged IP67 enclosure.
Models for use in hazardous environments are ATEX certified.
Product Specifications (M6 Series)
| Parameter item | Specifications |
|---|---|
| Dimensions (Housing) | Ø 182.63 mm |
| Spindle Dimensions | Hollow shaft Ø 20 to 45mm available |
| Principle of Induction | Optical or magnetic |
| Power supply voltage | 5V ± 5% 10~30VDC 5~30VDC |
| Output Method | HTL/Push-Pull, TTL/RS422 |
| Output signal | A B Z + A/B/Z/ (Optional dual-channel signal output) |
| Response frequency | 300 kHz max |
| Protection function | Reverse polarity protection: Yes Short-circuit protection: Yes |
| Connection Method | Cables, plugs, or internal wiring terminals |
| Qualification method | Axial rear outlet, radial side outlet |
| Maximum rotational speed | 6000 rpm |
| Spindle load | Radial 400N, axial 300N |
| Protection Rating | IP65, IP68 (optional) |
| Starting Torque | < 0.01Nm (IP65), < 0.05Nm (IP68) |
| Temperature Range | Operating: -40°C to +85°C (optional -40°C to +110°C); Storage: -40°C to +100°C |
| Impact/Vibration Resistance | Impact resistance: 2500 m/s², 6 ms; Vibration resistance: 100 m/s², 10..200 Hz |
| Weight | 7.3 kg |
| Pulse count per revolution | Common pulse counts: 1...10240 (Custom specifications are available within the range of 16384 pulses) |
Installation Dimension Drawing
Real-time Model Selection and Generation
| M6 | - | ① | ② | ③ | ④ | - | ⑤ | - | ⑥ | ⑦ | - | EX |
Note: For special shaft diameters, bore sizes, or cable lengths, please contact us for customization.
Sividi Encoder
TEL: +86 15050450799 (WeChat same number)
© Kunshan Sividi Co. Site Map Su ICP No. 14036688 
Su Gong Network Security No. 32058302003763
